Xiaomi is preparing to launch two “Redmi K” flagship in China – Redmi K80 Ultra and Redmi K pad. The company is cheating on official details for both, but we had already seen Wagihom Review and review the smartphone. Now he has done the same with a mini tablet.
The Redmi K Pad will have 8.8 “IPS LCD, which supports the dolby vision, looking at the labeled on the side (and dolby atomos for speakers). The screen to be 3,008 x 1,880px resolution (16:10), 165HZ refreshed rate and DC dimensing in the screen.
Redmi K Pad: 8.8 ”165Hz IPS LCD with Dolby Vision
The tablet has a unibody metal design with a sandblasty finish. It suggests the scales at 336g and measure 6.46 mm thick – this tablet is about performing in a highly portable form factor.
Redmi’s pad weighs 336g and is 6.46 mm thick
Talking about, the tablet is powered by 9400+, Plus LPDDR5X RAM and UFS 4.1 storage. Divisional 9400+, Plus LPDDR5X RAM and UFS. In the test, chipset showed impressive performance and cooling proved better than many tablets, even larger than pads.
Xiaomi used a large 12,050 mm vapor room to remove heat away from chipset and dump it into a metal frame. Interestingly, the vapor room is made of an aluminum alloy instead of traditional copper to save weight. There is some foam padding that will give the throne to the internal in case of decline.
Redmi K Pad (D9400+) Size against Redmagic Tablet 3 Pro (SD 8 Elite) (Image Source)
The motherboard is placed along the center line of the tablet, which helps to distribute the heat more evenly. The battery is divided into two cells on both sides and also has speakers (with atomos) next to each cell.
Two battery cells have a combined capacity of 7,500mAh – one is 3,505mAh (13.78Wh) and the other is slightly larger at 3,995mAh (15.71Wh). A 67W charger is included in the box, although the tablet only pulled the maximum of 55W and required 61 minutes for 1% to 100% charge. Bypass charging is supported.
Redmi’s pad internal
The USB-C port is located on the motherboard and the USB 3.2 is wired for General 1 Speed (5GBPS). It supports the displayport. There are two cameras on the tablet – a 13MP module (Ov13B 1/3.06 “) on the back and an 8MP one (ov08F, 1/4” on the front side (Ov08F, 1/4 “). There is no fingerprint reader on the board.
From here there is full decisori and review video of Redmi K pad Wagihom,
